Model 3196
Model HT 3196
Model LF 3196
Model 3996
Model CV 3196
Model 3196
This is the original ANSI pump that has become the standard of the industry. Over 600,000 installations attest to the remarkable performance of the 3196.Available with a wide range of ANSI PLUS features for handling difficult applications. X-Series power ends provide standard features for improved bearing and mechanical seal life.
· Capacities to 6,000 GPM(1364 m3/h)
· Heads to 730 feet (222 m)
· Temperatures to 500 F (260 C)
· Pressures to 375 PSIG (2586 kPa)
Materials : Ductile Iron, 316SS, CD4MCu, Alloy 20, Monel, Nickel, Hastelloy B and C, Titanium.
Model HT 3196 - ANSI High Temperature Process Pump
Centerline mounted in a heavy duty fabricated steel casing support, the Model HT 3196 minimizes shaft misalignment and piping strain associated with elevated temperatures up to 700F. This eighth member of the ANSI pump family features Goulds’ premier X-Series power end, multiple seal chamber options including the Taper Bore Plus, and a wide variety of rigid and rugged mounting systems.
· Capacities to 4,500 GPM (1,023 m3/h)
· Heads to 925 feet (282 m)
· Temperature to 700 F (372 C)
· Pressures to 450 PSIG (3,102 kPa)
Materials : Carbon Steel, 316SS, CD4MCu, Alloy 20, Hastelloy C
Model LF 3196 - Low Flow ANSI Process
Designed specifically to provide superior performance for low flow services. Features a concentric (circular volute) casing and open radial vane impeller to eliminate hydraulic and mechanical problems at low flows. X-Series power ends.
· Capacities to 220 GPM (50 m3/h)
· Heads to 925 feet (282 m)
· Temperatures to 700 F (372 C)
· Pressures to 450 PSIG (3102 kPa)
Materials : Ductile Iron, 316SS, CD4MCu, Alloy 20, Hastelloy B and C
Model 3996 - In-Line ANSI Process
For corrosives, abrasives, and high temperature. Fully open impeller, back pull-out design, heavy duty construction. Field alignment not required.
· Capacities to 1,500 GPM (340 m3/h)
· Heads to 700 feet (213 m)
· Temperatures to 500 F (260 C)
· Pressures to 375 PSIG (2585 kPa)
Materials : Ductile Iron, 316SS, Alloy 20, Monel, Nickel, Hastelloy B and C, CD4MCu, Titanium
Model CV 3196 - Non-Clog ANSI Process
Perfect solution for handling bulky, fibrous, or shear-sensitive liquids. Recessed impeller design provides non-clog pumping with minimum solids degradation. Capability to handle liquids containing 10 to 20 percent air/gas. X-Series power ends.
· Capacities to 2,700 GPM (610 m3/h)
· Heads to 440 feet (134 m)
· Temperatures to 500 F (260 C)
· Pressures to 285 PSIG (1965 kPa)
Materials : Ductile Iron, CD4MCu, Alloy 20, Hastelloy B and C
Technical 1